technical overview C create keysight technologies, inc. validated and performance optimized reference signals compliant to the 3gpp 1.28 mcps tdd and td-scdma/hspa C all 3gpp physical and transport channels for td-scdma/hspa and harq, cqi and ack/ nack functionality in hspa mode C use predefned reference measurement channels (rmc) and fxed reference channels (frc) to perform ue and bts receiver conformance testing C licensing that fts your specifc use case, timeframe and budge C easy-to-use, application-specifc graphical interface for confguring signals C accelerate the signal creation process with a user interface based on parameterized and graphical signal confguration and tree-style navigation keysight technologies signal studio for td-scdma/hspa N7612B
02 | keysight | signal studio for td-scdma/hspa N7612B - technical overview typical measurements test components with basic capabilities: C imd / npr C aclr C ccdf C evm C modulation accuracy C code domain power C channel power C occupied bandwidth verify receivers with advanced capabilities: C sensitivity C maximum input level C selectivity C blocking C intermodulation C power control simplify td-scdma/hspa signal creation keysight signal studio software is a fexible suite of signal-creation tools that will reduce the time you spend on signal simulation. for td-scdma/hspa, signal studios performance-optimized reference signalsvalidated by keysightenhance the charac - terization and verifcation of your devices. through its application-specifc user-interface youll create standards-based and custom test signals for component, transmitter, and receiver test. component and transmitter test signal studios basic capabilities use waveform playback mode to create and customize waveform fles needed to test components and transmitters. its user friendly interface lets you confgure signal parameters, calculate the resulting waveforms and download fles for playback. the applications for these partially coded, statistically correct signals include: C parametric test of components, such as amplifers and flters C performance characterization and verifcation of rf sub-systems receiver test signal studios advanced capabilities enable you to create fully channel-coded signals for receiver bit-error-rate (ber), or block-error-rate (bler) analysis. applications include: C performance verifcation and functional test of receivers, during rf/baseband inte - gration and system verifcation C coding verifcation of baseband subsystems, including fpgas, asics, and dsps apply your signals in real-world testing once you have setup your signals in signal studio, you can download them to a variety of keysight instruments. signal studio software complements these platforms by provid - ing a cost-effective way to tailor them to your test needs in design, development and production test. C vector signal generators C mxg x-series C exg x-series C psg C esg C m9381a pxie vsg C wireless test sets C pxb baseband generator and channel emulator C m8190a arbitrary waveform generator C m9420a pxie vector transceiver C waveform creator software C systemvue simulation software
03 | keysight | signal studio for td-scdma/hspa N7612B - technical overview component and transmitter test figure 1. typical component test confguration using signal studios basic capabilities with a keysight x-series signal generator and an x-series signal analyzer signal studios basic capabilities enable you to create and customize td-scdma/hspa signals to characterize the power and modulation performance of your components and transmitters on bts and ue. easy manipulation of a variety of signal parameters, includ - ing switching point, code domain power, and modulation type, simplifes signal creation. C create spectrally-correct signals for aclr, channel power, spectral mask, and spuri - ous testing C set parameters such as channel power and data channel modulation type (qpsk, 16qam, 64qam) for modulation verifcation and analysis, such as evm tests C confgure multi-carrier waveforms, each with modulation type, frequency offsets, timing offsets, power, baseband flter, and cell id C view ccdf, spectrum and time domain graphs to investigate the effects of power ramps, modulation formats, power changes, clipping, and other effects on device performance C simultaneously turn off all uplink and downlink timeslots to meet the requirements of power amplifer tests C generate slot-length based waveforms to help make fast pa tests with a waveform sequence. C use pre-defned fixed reference channel(frc) for ue component and transmitter tests
04 | keysight | signal studio for td-scdma/hspa N7612B - technical overview figure 2. generate fully channel-coded signals to evaluate the ber, bler, per, or fer of your receiver with keysight x-series signal generators and signal studios advanced capabilities receiver test td-scdma bts testing the 3gpp ts25.142 specification defines how to test td-scdma base station transmitters and receivers. to address the challenges of test - ing td-scdma components and receivers, signal studio for td- scdma/hspa enables you to gen - erate multiple carriers and standard compliant reference measurement channels. the user interface allows you to adjust the carrier spacing, power offset, number of carriers, channel coding type, crc size, and tfci value to meet your test needs. rf if iq dut: bts or ms receiver rf front end demodulator decoder ber/bler/ fer/per analyzer signal studios advanced capabilities address applications in td-scdma/hspa receiver test, including the verifcation of baseband designs and the integration of the baseband and rf modules. using waveform playback mode enables transport-channel coding to validate bts and ue receiver characteristics and performance. bts receiver testing C choose from a variety of pre-defned reference measurement channel (rmc) and frc confgurations for bts receiver conformance testing C turn on the dpch0 state to simulate multiple ue co-existence C customize rate matching attributes in the rmc confgurations C confgure uplink signals and harq feedback in hsdpa mode C set tfci value based on bts receiver confgurations C advanced functional testing with hsupa channels including e-puch, e-agch and e-hich with transport layer coding C pre-defned uplink multi-code per standard requirement ue receiver testing C choose a pre-defned reference measurement channel (rmc) confguration for early baseband verifcation C create hs-dsch, hs-scch and hs-pich in hsdpa mode C customize rate matching attributes in the rmc confgurations C set tfci values based on bts receiver confgurations C select downlink transmission crc size, channel coding type and tti value
05 | keysight | signal studio for td-scdma/hspa N7612B - technical overview features summary td-scdma/hspa component & transmitter testing receiver testing signal studio basic waveform playback mode advanced waveform playback mode td-scdma y y td-hsdpa y y calibrated awgn y y code domain and ccdf graphs y y multi-carrier timing and clipping y y short length waveform y y downlink up to 12 carriers y y preconfgured rmc signals y pdsch selectable modulations: qpsk,8psk, 16qam, 64qam y y dl-sch selectable crc size, tti, channel coding type, tfci y s1/s2 phase pattern selection y y hs-dsch, hs-dcch, and hs-sich generation y uplink up to 12 carriers y y preconfgured rmc/frc signals with transport channel coding y prach signal generation y selectable ul-sch coding rate, crc size, data payload y hsupa channels (e-puch, e-agch, and e-hich) y
06 | keysight | signal studio for td-scdma/hspa N7612B - technical overview base station conformance tests (3gpp ts25.142) td-scdma/hspa component & transmitter testing receiver testing signal studio basic waveform playback mode advanced waveform playback mode maximum output power y frequency stability y output power dynamics y transmit on/off power y output rf spectrum emissions y transmit intermodulation y transmit modulation y reference sensitivity level dynamic range y adjacent channel selectivity (acs) y blocking characteristics y intermodulation characteristics y spurious emissions y supported standards 3gpp technical specifcation version ts25.142 v11.4.0 ts25.221 v11.0.0 ts25.222 v11.0.0 ts25.321 v11.5.0 ts34.122 v11.6.0
07 | keysight | signal studio for td-scdma/hspa N7612B - technical overview performance characteristics defnitions specifcation (spec): represents warranted performance of a calibrated instrument that has been stored for a minimum of 2 hours within the operating temperature range of 0 to 55 c, unless other - wise stated, and after a 45 minute warm-up period. the specifcations include measure - ment uncertainty. data represented in this document are specifcations unless otherwise noted. typical (typ): represents characteristic performance, which 80% of the instruments manufactured will meet. this data is not warranted, does not include measurement uncertainty, and is valid only at room temperature (approximately 25 c). measured (meas): an attribute measured during the design phase for purposes of communicating expected performance, such as amplitude drift vs. time. this data is not warranted and is mea - sured at room temperature (approximately 25 c). the following performance characteristics apply to the instruments indicated in the respective tables. for performance characteristics of other instruments, refer to the respective product data sheet. aclr performance n5172b and n5182b mxg m9381a vsg standard option unv standard confguration offset specifcation (dbc) typical (dbc) specifcation (dbc) typical (dbc) measured (dbc) typical (dbc) 1 carrier adjacent (1.6 mhz) C74.7 C75.6 C74.7 C75.2 C 67.7 C 67. 2 alternate (3.2 mhz) C76.2 C78.7 C76.2 C79.4 C75.0 C75.1 3 carrier adjacent (1.6 mhz) C68 C71.5 C69.3 C71.6 C70.3 C69.0 alternate (3.2 mhz) C69.7 C73.2 C71.3 C75 C74.5 C73.3 6 carrier adjacent (1.6 mhz) C66.5 C69.7 C 67. 8 C71.1 C71.3 C70.2 alternate (3.2 mhz) C66.4 C70.1 C68.6 C72.8 C74.4 C73.3 evm performance n5172b and n5182b with option unv m9381a m9420a confguration measured evm typical evm nominal evm 1 carrier < 0.37% 0.37% rms < 0.5% rms
08 | keysight | signal studio for td-scdma/hspa N7612B - technical overview N7612B signal studio for 3gpp td-scdma/hspa model-option description connectivity N7612B-1fp connect to e4438c esg signal generator N7612B-2fp connect to e8267d psg signal generator N7612B-3fp connect to n5182b/72b mxg/exg signal generator N7612B-6fp connect to n5106a pxb baseband generator and channel emulator N7612B-7fp connect to keysight simulation software N7612B-8fp connect to e6607 ext wireless communications test set N7612B-9fp connect to m9381a capability N7612B-efp basic td-scdma/hspa N7612B-qfp advanced td-scdma/hspa hardware confgurations to learn more about compatible hardware and required confgurations, please visit: ( www.keysight.com/fnd/ signalstudio_platforms ) pc requirements a pc is required to run signal studio. ( www.keysight.com/fnd/signalstu - dio_pc ) ordering information software licensing and configuration signal studio offers flexible licensing options, including: C fixed license: allows you to create unlimited i/q waveforms with a specific signal studio product and use them with a single, specific platform. C transportable/floating license: allows you to create unlimited i/q waveforms with a specific signal studio product and use them with a single platform (or pc in some cases) at a time. you may transfer the license from one product to another. C waveform license: allows you to generate up to 545 user-configured i/q waveforms with any signal studio product and use them with a single, specific platform. the table below lists fixed, perpetual licenses only; additional license types may be avail - able. for detailed licensing information and configuration assistance, please refer to the licensing options web page at www.keysight.com/find/signalstudio_licensing try before you buy! free 30-day trials of signal studio software provide unrestricted use of the features and functions, includ - ing signal generation, with your compatible platform. redeem a trial license online at www.keysight.com/fnd/signalstudio_trial signal studio software updates to update previously purchased N7612B software to include the latest feature updates, you can purchase the N7612B-meu minor enhancement update fixed per - petual license. for more information, visit www.keysight.com/fnd/ N7612B-meu
09 | keysight | signal studio for td-scdma/hspa N7612B - technical overview additional information websites www.keysight.com/fnd/signalstudio access the comprehensive online documentation, which includes the complete software help www.keysight.com/fnd/N7612B www.keysight.com/fnd/signalstudio keysights td-scdma and hspa design and test solutions www.keysight.com/fnd/td-scdma www.keysight.com/fnd/hspa literature signal studio software, brochure, literature number 5989-6448en
10 | keysight | signal studio for td-scdma/hspa N7612B - technical overview mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. three-year warranty www.keysight.com/find/threeyearwarranty keysights commitment to superior product quality and lower total cost of ownership. the only test and measurement company with three-year warranty standard on all instruments, worldwide. keysight assurance plans www.keysight.com/find/assuranceplans up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. keysight infoline www.keysight.com/find/service keysights insight to best in class information management. free access to your keysight equipment company reports and e-library. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/ N7612B from hewlett-packard through agilent to keysight for more than 75 years, weve been helping you unlock measurement insights. our unique combination of hardware, software and people can help you reach your next breakthrough. unlocking measurement insights since 1939. 1939 the future for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-09-28-15) www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2008 quality management system this information is subject to change without notice. ? keysight technologies, 2013 - 2015 published in usa, november 26, 2015 5990-9099en www.keysight.com
|
